65
GB
5. Recommendation
-
Switch-off the machine before attaching or removing the bag.
-
The machine should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
-
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
-
Do not overreach and keep the balance at all times, always be
sure of the footing on slopes and walk, never run.
-
Do not touch moving hazardous parts before the machine is
disconnected from the mains and the moving hazardous parts
have come to a complete stop.
-
Do not connect a damaged cord to the supply or touch a
damaged cord before it is disconnected from the supply for the
reason that damaged cords can lead to contact with live parts.
-
Keep extension cords away from moving hazardous parts to
avoid damages to the cords which can lead to contact with live
parts.
-
Avoid using the machine in bad weather conditions especially
when there is a risk of lightning.
-
Stop the machine, and remove plug from the socket. Make sure
that all moving parts have come to a complete stop,
i. after striking a foreign object to inspect the machine for
damage;
ii. if the machine starts to vibrate abnormally, for immediately
check;
-
If the circuit was shorted or a breakdown happens, overload
protector will cut off power supply automatically.
