66
GB
-
In case of accident or breakdown immediately stop the machine:
Loosen your grip and the power supply will be cut off
automatically when an accident or breakdown occurs.
-
If the cord becomes damaged or entangled during use, loosen
the on-off switch and cut the mains before touching cord.
-
Inspect the machine, the supply and extension cord for signs of
damage or ageing before and after any use, in a dry, clean and
well-lit place.
-
Repair of the tool must only be carried out by a qualified repair
technician. Repair or maintenance by unqualified personnel can
lead to a risk of injury.
-
Use only extension cables (max. 50 m), which are suitable for
outdoor and fitted with couplers complying with IEC 60320-2-3
e.g. H07RN-F 3x1,5 mm² down to
–25°C H07BQ-F 3x1,5 mm²
down to
–40°C.
-
Residual Risk
Even if properly operating and handling this product in
accordance with all the safety requirements, potential risks of
injury and damage remain. Due to its construction and build, this
tool may present the following hazards:
a) Electric shock from insufficient insulation. Check the device
for damages and proper function before each use; if you
notice damages, no longer use it. And Do not use the
product when the product or your hands are damp or wet.
b) Ear damage if working without ear protection.
c) There is a risk of a short-circuit due to liquid penetrating the
housing. Do not immerse the product and the accessories in
water. And make sure that no water or other liquid can enter
the housing.
