37
EN
x) Not overreach and to keep the balance at all times, always be
sure of the footing on slopes and to walk, never run.
Maintenance and storage
a) When the machine is stopped for servicing, inspection or storage,
or to change an accessory, shut off the power source, remove
the battery pack and make sure that all moving parts are come
to a complete stop. Allow the machine to cool before making any
inspection, adjustment etc. Maintain the machine with care and
keep it clean.
b) Store the machine in a dry place out of the reach of children
c) Always allow the machine to cool before storing
d) When servicing the shredding means be aware that even though
the power source is switched off , the shredding means can still
be moved.
e) Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessories.
f) Never attempt to override the interlocked feature of the guard.
g) Switch-off the machine before attaching or removing the
collection bag.
Special safety instructions for battery-operated tools
a)
Ensure that the tool is switched off before inserting the battery.
Inserting a battery
into a tool that is switched on may result in accidents.
b)
Recharge the batteries indoors only because the battery charger is designed for
indoor use only.
Risk of electric shock.
c)
To reduce the electric shock hazard, unplug the battery charger from the mains before
cleaning the charger.
d)
Do not subject the battery to strong sunlight over long periods and do not leave it on a
heater.
Heat damages the battery and this is risk of explosion.
e)
Allow a hot battery to cool before charging.
f)
Do not open up the battery and avoid mechanical damage to the battery. Risk of short
circuit and fumes may be emitted that irritate the respiratory tract.
Ensure fresh air
and seek medical assistance in the event of discomfort.
g)
Do not use non-rechargeable battery.
This could damage the appliance.
h) The recommended ambient temperature range for the charging system during
charging is from 4ºC to 40 ºC.
i) The recommended ambient temperature range for tool and battery storage is from
0ºC to 50 ºC.
