www.eureka.com
3
Do Not Oil the motor or the brushroll at any time. The bearings are permanently
lubricated and sealed.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING
electric shock, or injury:
•
Do not use outdoors or on wet
surfaces.
•
Do not leave vacuum cleaner when
plugged in.
Turn off the switch and unplug
the electrical cord when not in use and before
servicing.
•
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children.
•
Use only as described in this manual.
Use only manufacturer’s recommended
attachments.
•
Do not use with damaged cord or plug. If
cleaner is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, call the Eureka Customer Service
HELPLINE at 1-800-282-2886.
•
Do not pull or carry by the cord, use cord as
a handle, close door on cord, or pull cord
around sharp edges or corners. Do not run
vacuum cleaner over cord. Keep cord away
from heated surfaces.
•
Do not use extension cords or outlets with
inadequate current carrying capacity.
•
Turn off all controls before unplugging.
•
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
•
Do not handle the vacuum cleaner with wet
hands or operate without shoes.
•
Do not put any objects into openings. Do not
use with any opening blocked; keep free of
dust, lint, hair and anything that may reduce
•
This vacuum cleaner creates suction. Keep
body away from openings and moving parts.
•
Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
•
•
Use extra care when cleaning on stairs.
•
combustible liquids such as gasoline, or use
on areas where they may be present.
•
Store you
U
cleaner indoors in a cool, dry area.
•
Keep your work area well lit.
•
Unplug electrical appliances before
vacuuming them.
•
Belt pulleys can become hot during normal
use. To prevent burns, avoid touching the
belt pulley when servicing the drive belt.
•
Turn off the power switch and unplug cleaner
before rotating the nozzle.
SAVE THESE INSTRUCTIONS
To reduce the risk of electric shock,
this appliance has a polarized plug (one blade is wider then the other).
change the plug in any way.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner
suddenly shuts off, push the on/off switch off (0) and unplug the cleaner. Check the cleaner for a possible source of
at least 30 minutes before attempting to use the cleaner. After the 30 minute period, plug the cleaner back in and
push the on/off switch on (l).
!
cup
cup
