Eureka MAGNUM 901 EB EVOLUTION, Основное руководство по эксплуатации, техническому обслуживанию и устранению неисправностей

Страница: 53 / 62

TROUBLESHOOTING CHART
ATTENTION!
ANY TYPE OF MAINTENANCE SERVICE OR TEST WITH THE EXCEPTION OF THOSE DESCRIBED IN
THE MANUAL MUST ONLY BE CARRIED OUT BY AN AUTHORISED AFTER-SALES SERVICE CENTRE
(ASC)
BEFORE ANY INTERVENTIONS CHECK THE CORRECT VOLTAGE
OF THE BATTERY. ATTENTION: THE BATTERY SHOULD BE CHARGE 100% AT A VOLTAGE OF 37.4 VOLT
PROBLEM CAUSE SOLUTION
The battery does not hold its charge Spent or malfunctioning elements Replace it
No led comes on when the key is inserted 1. Dead battery Recharge it
2. Malfunctioning fuse Replace it
3. Emergency switch pressed Unblock it
4. Battery mobile connector disconnected Connect it
5. Key operated switch broken Replace it
The auxilary motor does not turn 6. Dead battery Recharge it
7. Malfunctioning fuse Replace it
8. Malfunctioning remote electric motor switch Have it replaced
9. Cut- out switch is on Remove the key and reactivate it
again
10. Broken cut-out switch Have it replaced
11. Worn brushes Have it replaced
The traction does not work 12. Dead battery Recharge it
13. Brake is engaged Disengage it
14. Key out Insert it
15. Seat safety device on Sit down
16. 125A protection traction fuse is faulty Replace it
17. Motor wheel malfunctioning or blocked Have it repaired or replace it
18. Malfunctioning remote electric motor switch Have it replaced
19. Electronic check malfunctioning Have it replaced
20. Pedal box malfunctioning Have it repaired or replace it
21. Pedal control malfunctioning Have it repaired or replaced
With forward pedal pressed at the max, the
machine does not go at max speed
22. Hopper lifted Lower hopper
23. Dead battery Recharge it
The shaker does not work 24. Fuse broken Replace it
25. Shaker motor malfunctioning Have it replaced
26. Hopper lifted Lower hopper
27. Relay damaged Have it replaced
28. Push button, damaged Have it replaced
29. Lifting push button, damaged Have it replaced
The sweeper does not brake when the brake
pedal is pressed
30. Pedal blocked Have it checked
31. Clamps blocked Have them un blocked
32. Worn out clamps Have them replaced
33. Working mechanism not fasten Fasten them
53