manualshive.com logo in svg

Eureka MAGNUM 901 EB EVOLUTION, Основное руководство по эксплуатации, техническому обслуживанию и устранению неисправностей

Поделиться
Скачать
Eureka MAGNUM 901 EB EVOLUTION Скачать руководство пользователя страница 12

TRANSPORT - HANDLING

TRANSPORT

The machine must be fixed to a pallet to make it easier to transport and more secure.

To unpack it, do the following:

- connect a ramp to the pallet as shown in the figure

- remove the wedge locking the rear wheel in place and any other fixing materials; it is not 

necessary to remove the wedges on the front wheels.

- bring the machine down the ramp

The machine must be taken off the pallet by lifting it with a gantry crane or other suitable means 

providing that belts, ropes and chains connected to the machine in the openings indicated in the 

figure are used.

DO NOT REMOVE THE MACHINE FROM THE PALLET WITH A FORKLIFT TRUCK THAT COULD 

DAMAGE IT. 

HANDLING AND TRANSPORT

When the machine is moved from one place it is used in to another you are advised to:

- not load it on the vehicle with a forklift truck in order not to damage it

- lock the machine in place with the parking brake

- fix it well to the vehicle using belts, ropes and chains, securing it in the points indicated in the 

figure

Содержание MAGNUM 901 EB EVOLUTION































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды