Eureka 5400 Series, Руководство пользователя

Страница: 8 / 8

6 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com
Thermal cut-off
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating. If the vacuum
suddenly shuts off, push the power switch to off (O) and unplug the vacuum. Check the vacuum for a possible source of
overheating such as a full dust cup, blocked hose or clogged filter. If these conditions are found, fix them and wait at least
30 minutes before attempting to use the vacuum. After the 30 minute period, plug the vacuum back in and turn on the
switch. If the vacuum still does not work, take it to a Eureka authorized service center for repair or call 1-800-282-2886.
Problem solving
Problem Cause Solution
Motor will not start. Power plug • Push plug securely into outlet, try another outlet or
check circuit breaker.
Vacuum does not
clean carpet. Dust cup and filter
• Empty dust cup, clean and/or change filter.
• If picking up fine dust, the dust cup may not look full, but
a fine substance tends to reduce suction when it blocks
air flow through the filter and screen. Refer to page 2 for
filter maintenance. Make sure filter, screen and dust cup
are installed properly.
• Filter and screen must be in place for cover to lock.
No suction at the
end of hose. Dust cup and filter
Hose
• Empty dust cup, clean and/or change filter.
• If picking up fine dust, the dust cup may not look full, but
a fine substance tends to reduce suction when it blocks
air flow through the filter and screen. Refer to page 2 for
filter maintenance. Make sure filter, screen and dust cup
are installed properly.
• Filter and screen must be in place for cover to lock.
• Remove clogs from the hose that restrict the airflow.
Page 5
Turbo nozzle will not turn. Rotating brush • Check turbo nozzle for debris.
Vacuum is hard
to push. Carpet height setting
Belt
• Adjust knob to a higher position. Page 4
• Replace a worn, cut or out of shape belt. Page 4
Burning smell; brush roll
will not turn. Belt • Check brush roll for debris. Page 4
• Replace broken or out of shape belt. Page 4
Belt • Replace a worn, cut or out of shape belt. Page 4
Hose • Remove clogs from the hose that restrict the airflow.
Page 5
Carpet height setting • For carpet cleaning, turn height adjustment knob to lower
position.
Power switch • Step on power switch to turn vacuum on.
Thermal cut-off • See above.
Make sure vacuum is turned off and power cord is unplugged.
!