Euphonix Max Air, Руководство по эксплуатации

Страница: 141 / 188

Euphonix Max Air Mixing Console Operation Manual Center Section
141
7.5.5 Speaker Selection
The AFL and PFL solo signals can be routed to the following speakers by activating
their respective keys (4 in Figure 7-18) in the Solo Setup popup:
• None : The solo signal is not sent to a speaker but the solo bus can be routed to
other destinations using the Patch View.
• Alt 1 : The solo signal is sent to the Alt1 speaker.
• Alt 2 : The solo signal is sent to the Alt2 speaker.
• Control Room : The solo signal follows the active control room speaker selec-
tion (Main, Alt1, or Alt2).
7.5.6 Solo Speaker Dim
In AFL and PFL modes, the speakers not fed by the solo signal can be dimmed. Touch
the
Dim Control Room when Alt1 or Alt2 is selected button (5 in Figure 7-18) in the
Solo Setup popup.
7.5.7 Solo-Safe
Figure 7-19 Solo Safe Popup
Solo-Safe is used with the Solo-In-Place mode and has no effect in AFL or PFL modes.
Solo-In-Place mode effectively mutes all channels except the soloed channel. Designat-
ing a channel Solo-Safe allows it through to the Main busses even when another signal
is soloed. Solo signals can be heard with effects if the effects returns are designated
Solo-Safe.