14
15
Push the dust collector back into the main unit.
- It is recommended to empty the dust collector and clean the filter after every use.
- You can wash the dust collector, pre-filter and foam filter with water. Be sure to
air-dry them thoroughly before reassembling. Do not wash the high-performance
filter with water, as it may damage the filter and reduce the suction power.
Clean the Rolling Brush
Pull on the release tabs to unlock brush guard as shown.
Lift the rolling brush to remove.
Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
Reinstall the rolling brush by inserting the fixed protruding end first and then clicking
into place.
Press down to snap the brush guard into place.
1
4
2
5
3
Cleaning and Maintenance
Clean the Dust Collector and Filters
Press the dust collector release button to pull the dust collector out.
Open and empty the dust collector.
2
1
Separate the pre-filter by pulling the hooks as shown.
Take out the foam filter and high-performance filter.
3
4
Clean the dust collector and filter with a vacuum cleaner or a cleaning brush.
Put the filters back together in the dust collector.
