16 EN
EN 17
6
Remove objects within 3.3 ft/1 m to the left and right sides and within 6.6 ft / 2
m of the front of the auto-empty station. If you cannot remove the objects, check
whether RoboVac can return to the auto-empty station normally. If not, contact
eufy Customer Service for help.
7
Connect the power cord to the auto-empty station and a wall outlet.
When the auto-empty station connects to AC power, the LED indicator on
the auto-empty station is steady white.
• The auto-empty station has two versions: high-voltage and low-voltage.
The voltage information can be found on the bottom of the device. Make
sure you have purchased the device with the correct voltage, otherwise it
may not work normally.
• Install the auto-empty station in a location that RoboVac can easily access.
It is recommended to place the auto-empty station against a wall, and on a
hard, level surface rather than on rugs or carpets.
• Always keep the auto-empty station plugged in, otherwise RoboVac will
not automatically return to it.
Use the Auto-Empty Station
• RoboVac will return to the auto-empty station at the end of a cleaning
cycle or when its battery is running low.
• Make sure the power cord is connected to a power outlet and the dust bag
is properly installed.
• Based on eufy's internal laboratory tests, the dust bag can lock 99.7% of
allergens (such as dust, garbage, dust mites, pet dander, etc.) to prevent
them from emitting into the air.
• If the cleaning time or the time period between two cleaning sessions is too
short, the auto-empty station may not empty the dust box automatically.
• The emptying function will not be activated if you have selected the Do-
Not-Disturb mode in the eufy Clean app.
• Certain noise may exist when the auto-empty station is working. You are
recommended to place the device in a proper location or select the Do-
Not-Disturb mode in the eufy Clean app to prevent noise interference.
Attach RoboVac to the auto-empty station by aligning its charging pins.
RoboVac starts charging automatically.
If RoboVac has finished a round of cleaning (more than 15 minutes), it will empty
the dust box automatically by default when it returns to the auto-empty station.
