manualshive.com logo in svg

EUCHNER CES-I-BR Series, Руководство по эксплуатации

Поделиться
Скачать
EUCHNER CES-I-BR Series Скачать руководство пользователя страница 23

23

2510145-02-07/18 (translation of the original operating instructions)

Operating Instructions

Non-Contact Safety Switch CES-I-BR-.-C07-…

EN

11.1.1. Radio frequency approvals
FCC ID:  2AJ58-01
IC: 

  22052-01

FCC/IC-Requirements

This device complies with part 15 of the FCC Rules and with Industry Canada’s licence-exempt RSSs. Operation is subject 

to the following two conditions:
1)  This device may not cause harmful interference, and
2)  this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority 

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 

to correct the interference at his own expense.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploi-

tation est autorisée aux deux conditions suivantes : 
(1) l’appareil ne doit pas produire de brouillage, et 
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.

Содержание CES-I-BR Series

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды