EUCHNER CES-I-BR Series Скачать руководство пользователя страница 19

Страница: 19 / 32

2510145-02-07/18 (translation of the original operating instructions)

Operating Instructions

Non-Contact Safety Switch CES-I-BR-.-C07-…

9. Commissioning

9.1. LED displays

You will find a detailed description of the signal functions in chapter 10. System status table CES‑I‑BR‑… on page 21.

LED

Color

STATE

green

DIA

red

9.2. Teach-in function for actuator (only for unicode evaluation)

The actuator must be allocated to the safety switch using a teach-in function before the system forms a functional unit.
During a teach-in operation, the safety outputs and the monitoring output OD/C are switched off, i.e. the system is in the

safe state.

Tip!

It is recommended to perform the teach-in operation prior to mounting. Mark switches and actuators

that belong together in order to avoid confusion. For devices to be connected in series, we recommend

performing the teach-in operation separately for each device prior to series connection.

Important!

The teach-in operation may be performed only if the device functions flawlessly. The red DIA LED

must not be illuminated.

The safety switch disables the code of the previous actuator if teach-in is carried out for a new

actuator. Teach-in is not possible again immediately for this actuator if a new teach-in operation is

carried out. The disabled code is released again in the safety switch only after a third code has

been taught in.

The safety switch can be operated only with the last actuator taught in.

The number of teach-in operations is unlimited.

If the switch detects the actuator that was most recently taught in when in the teach-in standby

state, this state is ended immediately and the switch changes to normal operation.

If the actuator to be taught in is within the operating distance for less than 30 s, it will not be acti-

vated and the most recently taught in actuator will remain saved.

9.2.1. Preparing device for the teach-in operation and teaching in actuator

1. Apply operating voltage to the safety switch.

The green LED flashes quickly (approx. 5 Hz)

A self-test is performed during this time (approx. 5 s). After this, the LED flashes cyclically three times and signals that

it is in standby state for teach-in.

Standby state for teach-in remains active for approx. 3 minutes. On switches that have not been taught in, teach-in

standby is unlimited.

2. Move new actuator to the read head (observe distance < S

Teach-in operation starts, green LED flashes (approx. 1 Hz). During the teach-in operation, the safety switch checks

whether the actuator is a disabled actuator. After successful teach-in, the STATE and DIA LEDs flash alternately. The new

code has now been stored, and the old code is disabled. The teach-in operation takes approx. 30 s.

3. Disconnect safety switch from the operating voltage for 3 seconds.

The switch is in normal operation after the self-test.

LEDs

Содержание CES-I-BR Series

































Результаты поиска

Содержание CES-I-BR Series

Отзывы:

Бренды по названию

Популярные бренды

EUCHNER CES-I-BR Series, Руководство по эксплуатации

Результаты поиска

Содержание CES-I-BR Series

Отзывы:

Бренды по названию

Популярные бренды