manualshive.com logo in svg

EUCHNER CES-AP-CL2-CH, Системное руководство

Поделиться
Скачать
EUCHNER CES-AP-CL2-CH Скачать руководство пользователя страница 5

System Manual Safety Switch CES-AP-C.2-CH

5

General safety instructions

Safety switches fulfill personal protection functions. Incorrect installation or tamper-

ing can lead to fatal injuries to personnel.
Check the safe function of the safety guard particularly

after any setup work
after the replacement of a CES component
after an extended period without use
after every fault

Independent  of  these  checks,  the  safe  function  of  the  safety  guard  should  be 

checked at suitable intervals as part of the maintenance schedule.

Warning!

Danger of fatal injury in the event of incorrect connection or incorrect use. 

Safety switches must not be bypassed (bridging of contacts), turned away, 
removed or otherwise rendered ineffective.
On this topic pay attention in particular to the measures for reducing the pos-
sibility of bypassing from EN 1088:1995+A:008, Section 5.7.

The device is only allowed to be installed and placed in operation by authorized 
personnel 

who are familiar with the correct handling of safety components  
who are familiar with the applicable EMC regulations
who are familiar with the applicable regulations on health and safety and ac-
cident prevention   
who have read and understood the operating instructions and the system 
manual



Important!

Prior to use, read the operating instructions and the system manual and keep 
these in a safe place. Ensure the operating instructions and the system manual 
are always available during mounting, setup and servicing. EUCHNER cannot 
provide any warranty in relation to the readability of the CD for the storage pe-
riod required. For this reason you should archive a printed copy of the system 
manual. If you should lose the operating instructions or the system manual, you 
can download these documents from www. EUCHNER.de.




Содержание CES-AP-CL2-CH



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды