45
2540772-01-11/21 (translation of the original operating instructions)
Operating Instructions Bus Module
MBM-EC-..-MLI-… (EtherCAT)
EN
13.4.2. Using device web interface
Proceed as follows:
1.
Set
WWW
DIP switch to
ON
Notice: The change is effective only after a restart.
2.
When the EtherCAT slave device is operated on a PLC, the web interface can be opened using a PC by connecting the
PC with a switchport terminal or the PLC’s network interface. Alternatively, the bus module can be operated directly on
the network card.
3.
Open the device web interface in the browser (IP address: XXX.XXX.XXX.XXX)
¨
The HOME page appears.
Fig. 7:
HOME page on the device web interface in the bus module MBM
There you can see information on the bus module MBM and on the modules and submodules connected. Devices with errors
have a red status.
On the HOME page, you can do the following:
Ì
Click the name of a module to open the diagnostics page for the module.
Ì
Click FAULT-LOG to display a fault log for the overall system. All current and previous errors since setup are listed there.
The error list can also be downloaded from the device. With this file, our support team will be able to provide specific
assistance if you have problems. The download link is at the end of the error list.
Click ENVIRONMENT to display available environment parameters.
Ì
The password-protected SERVICE page can be accessed only for on-site support by EUCHNER.
