ETS LEGEND 548, Руководство пользователя

Страница: 45 / 48

Legend 548 Assembly and User Manual - 45
30068-02A
ISSUE RESOLUTION
My bed is connected to a
T-Max® remote system but
I am having trouble getting
into “parameter” mode
My bed, connected to a
T-Max® Manager, did not
display “DEL” but does in-
dicate:
“0”
a tanning time and the
lamps have come on
a tanning time but the
lamps have not come on
When auto-addressing the
fi rst bed does not register
an “id”
My salon suffers frequent,
short power outages and
clients complain about los-
ing session time
You have probably attempted to connect your sunbed to
the remote system already. Disconnect the remote plug(s)
from the ports at the back of the sunbed, wait 90 seconds
and try again.
1. Remote device has not been set.
2. The sunbed has not been connected to the remote system,
see Remote Connections.
1. Delay time of T-Max® Manager has not been set.
2. Delay time has expired and session has begun.
Auto start function of T-Max® Manager has been turned
off. Press the START/TIME button to turn on lamps.
When using the auto address feature of the T-Max® Man-
ager you must wait 10 seconds from the time you start the
auto address function before addressing the
fi rst bed.
If you have a T-Max® Manager, changing parameter 23
from “0” to “1” will allow the tanning bed to remember
how much time was left when power goes out and resume
its session after power is restored. See
Parameters
.