ETS LEGEND 548, Руководство пользователя

Страница: 44 / 48

44 - Legend 548 Assembly and User Manual
30068-02A
ISSUE RESOLUTION
Sunbed not tanning
Lamps fail to light and timer
display is blank
One or more lamps fail to
light
The face tanners will not
come on
I forgot what address, or
“id”, I set my sunbed to
Timer display is indicating
E 8
Timer display is indicating
E 9
Timer display is indicating
E 10
Timer display changes to in-
dicate a tanning time after
the timer button is pressed
but lamps do not come on
Timer display continues to
show a 0 after the timer but-
ton is pressed
1. Clean sunbed, see Thorough Periodic Cleaning.
2. Ensure supply voltage is between 215 and 245V AC.
3. Replace lamps if lamp hours are greater than 800hrs.
4. Replace acrylic.
1. Make sure the unit is connected to a power source.
2. Check source of AC power. Reset circuit breaker or re-
place fuse.
1. Check that lamp is installed correctly.
2. Switch unlit lamp with a lamp that lights, if new lamp lights
and old lamp still does not, replace old lamp.
1. Face tanners will not relight for 1 minute if turned off.
2. Replace face tanner lamp, see Removing/Replacing Face
Tanner Lamp.
Press and hold the STOP button until the display shows
the ID. See
Parameters
for instructions to change the ID if
necessary.
Current sensor with the black wires running through it has
detected that the bed is on when it should be off.
Current sensor with the Red wires running through it has
detected that the bed is on when it should be off.
Bed is off when it should be on.
1. If remote is being used, other than T-Max® Manager, the
external timer may not be activated.
2. Remote wiring is incorrect, see the instructions provided
with the remote interface kit.
1. T-Max® Manager remote system has not yet been set.
2. Sunbed address is not set correctly, see Remote Connec-
tions.