ETS LEGEND 548, Руководство пользователя

Страница: 43 / 48

Legend 548 Assembly and User Manual - 43
30068-02A
Un fi ltered light from face tanner
can cause severe burns.
Never turn sunbed on while face
tanner is disassembled or when
glass
fi lters are removed.
Immediately discontinue use of
this equipment if face tanner glass
is broken or any un
fi ltered light
can be seen escaping face tanner
assembly.
DANGER
Removing/Replacing Face Tanner
Lamp
After opening the canopy acrylic, replace
the face tanner lamps as follows:
The face tanner glass is held in place 1.
by two metal brackets. Support the face
tanner glass with your hand while un-
screwing the two screws on one of the
brackets. The face tanner glass will slip
out of the other bracket.
The lamp can now be exchanged. Sim-
2.
ply pull the face tanner lamp toward you
to remove it from the socket. Install the
new lamp, using a clean cloth or paper
towel, by inserting it into the lamp sock-
et. Ensure that the lamp is
fi rmly seated
in the lamp socket.
Note! Never take hold of the lamp such that
your fi ngers are in contact with the lamp
glass. Finger oils will greatly reduce the
lamp’s operational life.
Slide the face tanner glass into the 3.
bracket attached to the bed and lock it
in place with the other bracket and two
screws.