Images are for illustrative purposes.
We reserve the right to make changes.
13
®
RDM-31-0322
NORD
canopy
|
OZ 3.1 Installation Guide
Rout the other end to a junction box that is situated on top
to the canopy.
Finally, if it is desired to connect the system to the local area network, connect the LAN cable to the Control
Panel by unplugging the existing short LAN jumper cable inside and connect your LAN cable straight to the
port on the board as seen below.
LAN cable must be connected to a network switch or to the closest LAN socket.
Reassemble the housing in reverse order, with the smaller LED display above the larger one. Ensure the text
on the plexiglass is oriented correctly and fasten the housing with the two fixing screws on the sides.
PLC
I/O
NOTE! After installing the ozone cleaning system and measuring the ventilation system,
the ozone equipment must be commissioned for the first time. Only trained and authorized
persons by ETS NORD may perform the initial commissioning. Inform the seller’s
representative of the need to start the equipment for the first time.
