ETS-Lindgren EMCenter, Руководство пользователя

Страница: 23 / 43

www.ets-lindgren.com Installation
23
6.0 Installation
Before connecting any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin
included with your
shipment.
If you plan to operate the EMCenter manually, software installation is
not required.
The EMCenter™ Modular RF Platform may be controlled from a computer using
these software products:

ETS-Lindgren TILE!™ (Totally Integrated Laboratory Environment)

ETS-Lindgren EMQuest™ Data Acquisition and Analysis Software
Plug-In Card Installation
Leave an empty slot or space 1U in height
beneath the EMCenter to allow sufficient
cooling through the bottom air inlets of the
cabinet.
1. Install each plug-in card per the detailed installation steps provided in
the separate manual for the specific card.
2. See
Power On
on page 26 and follow the instructions to turn on the
EMCenter.
The EMCenter is now ready for use. You can control all cards through the
touchscreen. See page 25 for information on using the EMCenter touchscreen.