ETS-Lindgren EMCenter, Руководство пользователя

Страница: 31 / 43

www.ets-lindgren.com Manual Control of the EMCenter
31
Configuration Screen
Press Config to display the Configuration screen. The IEEE address of the
EMCenter can be changed here.
Sample Configuration Screen

IEEE Board— Press Change to enable or disable the board
(if installed).

IEEE Address— Press Up or Down to change the address
(if installed).

IP Address— Press Change to set a new address.

Gateway Address— Press Change to set a new address.

Touchscreen Calibration— Press Calibrate Screen and follow the
on-screen instructions.

Laser Protection Code— Press Change to enter or change a code.