3
●
DMX control mode
–
This function will allow you to control each individual units traits with a standard DMX
512 controller.
●
Sound control mode- When music play. The unit will work with music beat.
●
Master-slave mode
–
One unit will work as the master in the one of the above three modes, other units in
the chain will work in synchronization towards the master.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their own Programs
tailored to their own individual needs. This function also allows you to use your units as spot lights.
1. This function will allow you to control each individual unit
’
s traits with a standard DMX 512 controller.
2. The LED suit uses
，
4/7/11 DMX channels to operate. Please see
“
DMX Values and Functions
”
for the DMX
traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX controller. Set
your desired DMX address following the setup speci
fi
cations that come with your DMX controller.
Touch Buttons
There are four touch buttons under the LED display: Menu, Up, Down,
Enter. Normally, the LED will display the current DMX address code of
the
fi
xture. At this time, presses up and down to choose the functions
you want.
LED Operation Menu:
LED screen with four touch buttons
: MENU, UP, DOWN and ENTER.
Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust the
values. Press ENTER to con
fi
rm.
After power on and initialization, it will show the status before last power o
ff
. Then, the unit is ready for setting
and working. Please see the following table for setting information.
Menu Map
Main Menu
Value
Functions
001-512
4 channels mode
001-512
7 channels mode
001-512
11 channels mode
00-99
Fade In & out (Fast-Slow)
00-99
Color snap (Fast-Slow)
00-99
Color selection
000-255
Head1 Red intensity
000-255
Head1 Green intensity
000-255
Head1 Blue intensity
