15 | 24
Etrel Load Guard | User manual
|
Enable the access as shown on the previous figure. Then click on the Allow
access and enable the configuration of the Load Guard. If the software
finds the Load Guard in its network, the data of Load Guard will be
presented on the screen.
Figure 25: Display of Load Guard information
Load Guard serial number is important information. In the above case it
is 18430011. For establishing connection this serial number must be listed
in charging station web interface. Click on the white part of the screen
(the line with Load Guard data) opens the configuration window. If the
software finds Load Guard and the MAC address is not shown, this means
that the computer is not in the same network as Load Guard.
Figure 26: MAC is not shown
–
the computer is not in the same network
