ETOP ITX-E16, Руководство пользователя, Страница: 18 / 96

10 ITX-E16 User`s Manual
JP1, JP2, JP3: FSB SPD Selection
JP1 and JP2 and JP3 allow users to select the CPU FSB speed. It can
be 533M or 667M. User should select the correct FSB speed to make
their CPU run on correct speed and ensure the system runs stably.
FSB SPD JP1~JP3
533M
JP1 JP2 JP3
667M
JP1 JP2 JP3
JP4: Clear CMOS RAM Data
This 3-pin Jumper allows the user to disconnect the built-in 3V
battery power to clear the information stored in the CMOS RAM.
To clear the CMOS data:
(1) Turn off the system power.
(2) Remove Jumper cap from pin1&2.
(3) Short the pin2 and pin3 for three seconds.
(4) Put Jumper cap back to pin1 & 2.
(5) Turn on your computer.
(6) Hold Down <Delete> during boot up and enter BIOS setup to
enter your preferences.
COMS NORMAL CLEAR
JP4
1-2 2-3