ETOP ITX-E16, Руководство пользователя, Страница: 12 / 96

4 ITX-E16 User`s Manual
Specifications

Processor Support:

Intel Core 2 Duo, Core Duo, Core Solo, Celeron-M CPU.

Support Front Side Bus speed 533MHz or 667MHz

Micro-FCPGA478 Socket-M.

Major Chipset:

Intel 945GME and ICH7M chipset.

RealTek RTL8111C LAN chip.

Winbond 83627HF Super I/O.

ALC888 High-Definetion Audio chip.

System Memory:

Two DDR2 SO-DIMM Sockets

Support DDR2 533/667 unregistered non-ECC memory up to
4.0 GB.

Dual Channel Mode Supported.

Video Controller:

Intel 945GME Integrated GMA950 graphic engine.

One 15-Pins D-Sub Female connector for CRT displays.

One 40-pins 1.25mm pitch connector for Dual 18/24-bits
LVDS LCD displays.

One 20-pins 1.25mm pitch connector for DVI displays.

One 5-pins JST connector for Inverter power and brightness
control.

Super I/O:

Winbond 83627HF LPC I/F Super I/O chip.

Six Serial ports as COM1~COM6. COM2 is RS232/422/485
selectable by jumpers

COM1 is D-Sub 9-pins male on rear panel. Pin9 are powered
with 5V or +12V by jumper.

COM2~COM6 are pin-header (2x5 pin-header/ 2mm pitch)
for internal connections.

COM6 Pin9 is powered with either 5V or 12V selected by
Jumper.

1 x Parallel port supports SPP/ECP/EPP mode. (25-Pins D-Sub
Female on Rear).

1 x IrDA port; (5-pins pin-header with +5V powered).

Four USB2.0 ports for internal or front panel connection.
( 2x5 pin-header/ 2mm pitch).

Four USB2.0 ports integrated with RJ45 connector on rear
panel.