Eton VECTOR 250 - SERVICE, Руководство по обслуживанию

Страница: 94 / 154

94
11-2 General information
Operational precautions
y
This Section concerns disassembly of the crankcase for repair purpose.
y
Remove following components before disassembling crankcase.
－
Engine remove Section 5
－
Cylinder head Section 6
－
Cylinder and piston Section 7
－
Drive face and driven pulley Section 8
－
AC generator/Start one way clutch Section 10
y
In case it requires replacing the crankshaft bearing, the driving chain of engine oil pump or the timing
chain, it is preferably to replace crankshaft as a unit.
Specification Unit: mm
Item Standard Limit
Connecting rod side clearance of the big end 0.100~0.400 0.600
Vertical clearance of the big end of the connecting rod 0~0.008 0.050
Crankshaft
Run-out 0.030 0.100
Torque value
Bolts for crankcase 0.8~1.2kgf-m
Engine oil drain bolt 3.5~4.5kgf-m
Cylinder stud bolt 1.0~1.4kgf-m
Tools
Special tools
L. crank shaft oil seal driver (27*42*7): SYM-1332100-HMA
11-3 Trouble diagnosis
Engine noise
y
Loose crankshaft bearing
y
Loose crankshaft pin bearing
y
Worn out piston pin and pin hole