ETNA KI560ZT, Инструкция по эксплуатации

Страница: 32 / 92

EN 10
Pan detection
• If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the
hob will remain cold.
• If a (ferrous) pan is not placed on the cooking zone within 2 minute, the cooking zone will
automatically switch off (see also chapter ‘Pans’).
Cooking-timer/minute minder
• A cooking-timer can be set for each active cooking zone.
• The hob also has a minute minder. Both the cooking-timer as well as the minute minder. can
be set for a maximum of 99 minutes.
• The minute minder works in the same way as the cooking-timer, but is not linked to a
cooking zone. When the hob is switched off the minute minder is aborted.
• The minute minder can only be switched off when the hob is switched on.
Select the desired function:
• Cooking-timer — the timer is linked to a active cooking zone. After the set time has
elapsed, the cooking zone will switch off automatically.
• Minute minder — no cooking zone will be switch Off after the set time has elapsed. Only
an alarm will sound.
Boost
• The ‘Boost’ function is used to cook at maximum power for a short period of time
(maximum 5 minutes). The power is reduced to the previous setting at the end of the
maximum boost time. Boost can only be set if the temperature of the hob allows it.
• When ‘Boost’ is active no cooking timer can be set.
USE