ETNA KCV154WIT, Инструкция по эксплуатации

Страница: 22 / 52

EN 10
General
If you notice a crack in the glass top (however small), switch the hob Off immediately, unplug
the hob, turn off the (automatic) fuse switch(es) in the meter cupboard or, in the event of a
permanent connection, set the switch in the power supply lead to zero.) Contact the service
department.
Troubleshooting table
If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first by checking the points mentioned below or
check for more information the website ‘
www.etna.nl/www.etna.be ’.
Symptom Possible cause Solution
A slight smell is noticeable
the first few times the hob
is used. The new appliance is
heating up. This is normal and will
disappear once it has been
used a few times. Ventilate
the kitchen.
The pans make a noise while
cooking. This is caused by the energy
flowing from the hob to the
saucepan. At high settings this is
perfectly normal for some
pans. It will not damage either
the pans or the hob.
The hob is not working. There is no power supply
due to a defective cable or
a faulty connection. Check the fuses or the electric
switch (if there is no plug).
A fuse blows as soon as the
hob is switched on. The hob has been wrongly
connected. Check the electrical
connections.
TROUBLESHOOTING