1. Unscrew the sensor cover in the direction shown (Fig 1.).
2. Screw the sensor into the bottom of the sensor to complete the installation (Fig 2. ) (Improper installation may cause waterproof failure);
3. Test Light.
On / Off
Control
Detection
Area
Hold
Time
Daylight
Threshold
Stand-by
Period
Stand-by
Dimming Level
Remote Control
Setting
10-15M
High Bay
Altitude
Head Offi ce -
1850 Wilson Ave. · Toronto, ON · M9M 1A1 ·
Tel:
416.741.7336 ·
Fax:
416.741.9104
Toll free:
in Canada. 1.800.661.9610 · in USA. 1.888.762.5384 (SOCKETS4U)
www.etlin-daniels.com· For sales/service questions - [email protected]
SAVE THESE INSTRUCTIONS - READ ALL INSTRUCTIONS CAREFULLY
SENSOR INSTALLATION
FIG .1
FIG .2
APPLICATION ENVIRONMENT.
1. Suitable only for indoor applications.
2. Not suitable for spaces where all walls are metal or with metal roofing.
3. Not to be installed in close proximity to large machinery like ventilators, ceiling fans, to avoid false triggering due to
machine vibrations.
INSTALLATION PRECAUTIONS.
1. The areas of detection cannot be shielded by metal objects.
2. Ensure the Microwave Sensor is properly secured to ensure Watertight seal.
OVERVIEW
• Automatic On / Off control with Daylight Sensor
• Optional detection range, holdtime, daylight threshold, Standby period and standby dimming level.
• Remote control settings available.
HBRA7 – INSTALLATION GUIDE MICROWAVE SENSOR
USER NOTES.
1. The Microwave Sensor can penetrate walls or glass thinner than 20cm, and will be weaker if the surface is thicker than 20cm.
2. The detection area will be affected by speed of motion, mounting height, and movement volume
3. The detection surface of the sensor shall be installed facing the detection area.
4. Wiring must be in accordance with the wiring diagram to avoid short circuit.
15m
5
years
INSTALLATION FOR HBRA7 SERIES ROUND WITH
MICROWAVE SENSOR BASE HIGH BAY
