ETL Esse-ti HELPY 2W-V, Руководство пользователя

Страница: 28 / 32

Page 28 PROGRAMMING
Programming via
e-stant
software
It is possible to program Helpy 2W-V via computer by using the USB/serial
proprietary cable and the dedicated
e-stant
software.
e-stant
software also allows to:
- update the firmware of the Helpy 2W-V
- customize the messages of the Helpy 2W-V
- set a micro SD card to use for programming, customizing the messages and
updating the firmware of the Helpy 2W-V.
e-stant
can be downloaded at the following link:
http://www.esse-ti.it/en/download_m2m.asp
Programming via micro SD card
The micro SD card properly set allows to:
- program the Helpy 2W-V
- update the firmware of the Helpy 2W-V
- customize the messages of Helpy 2W-V.
To use of the micro SD card see the relating instructions.