ETL Esse-ti HELPY 2W-V, Руководство пользователя

Страница: 17 / 32

MINIMUM OPERATIONS TO VERIFY PROPER INSTALLATION Page 17
MINIMUM OPERATIONS TO VERIFY
PROPER INSTALLATION
1. PROGRAMMING

Access to programming: lift the local telephone handset and dial
.
The programming activated message will be heard.

Program a telephone number for the emergency-call alarm:
dial
<telephone number> .

Record the identification message of the specific elevator, which is
meant to contain all necessary information concerning the elevator
location: dial
and, after the “Correct” message, record
the message and hang up.

To listen to the message again : lift the handset and dial
.

Make an external call to check the PSTN line or the universal GSM
gateway is properly working: dial and
key in the telephone number to
make a test call.
2. TESTING THE ALARM PROCEDURE

Press the emergency call button for more than 2 seconds (factory
default ).
The alarm starts.
3. ANSWERING THE ALARM
Note: the activation mode of the communication with the trapped
person can be configured with the “Handsfree connection
mode during an alarm” programming (code 78).
-1
st
mode: automatic handsfree connection after the message
has been played
(factory default)

Answer by the recipient .
H andsfree mode will be activated after the voice messages has been played .

Speak with the trapped p assenger .
-2
nd
mode: handsfree connection by “Handsfree activation” code

Answer by the recipient .