ETL EF-14A Скачать руководство пользователя страница 6

 

Note: The flame effect on this electric fireplace insert is created by LED Bulbs. 
The life of these LED bulbs will be 100,000 hours. The users are not recommended to   
Replace the LED Bulbs. For any reason should the bulbs stop working properly, contact a 
Qualified technician. 
 

Cleaning:

 

 

Turn heater OFF and unplug from electrical outlet before any cleaning or maintenance 
is performed. Wait at least 10 minutes to allow all components to cool properly. 

 

Use a vacuum or duster to keep heater and vent area clean from dust and dirt. 

 

The exterior of the fireplace should be cleaned with a damp cloth or duster. 
Do not use abrasive cleaners or liquid sprays. 

WARNINGS AND CAUTIONS 

WARNING  

To avoid electrical shock not open the back panel of the insert unless 

the   

            Power has been turned off. And the insert has been unplugged. 
WARNING      Any electrical repairs.to this electric fireplace. Should only be   
            Performed by a qualified technician. 
WARNING      Any electrical wiring repairs should only be performed by a qualified   
            Technician. And also must comply with local buildings codes. 
WARNING      Discontinue use of this electric fireplace if any of the follow has   

 

-12- 

            Occurred: Water damage. If insert has been or dented. If power cord has     
            Become broken. If power cord becomes hot to touch, if unit smokes or   
            Smells like smoke. 
Note:      When the heat functions is used for the first time. A slight odor may be   
        Present. This is normal and should be occur again unless heater is not used   
        For extended periods of time and dust is allowed to accumulate on heater   
        Element.      
                                                               

                          

Technical Specification 

 

Supply: 120V/60Hz 

 

Rated power:750W/1500W 

Meaning of crossed - out wheeled dustbin: 
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection 
facilities. 

Safety Cut-Off 

 

This appliance is fitted with a safety cut-off which will operate if the fire overheats 
(e.g. due to blocked air vents) .For safety reasons, the fire will NOT automatically 
reset. 

 

To reset the appliance, disconnect the appliance from the mains supply for at least 15 
minutes. Reconnect the supply to the mains and switch on the appliance. 

Troubleshooting 

 

Symptom 

Solution 

No operation/no fan, 

Check fuse by replacement, 
Check for safety cut-off operation, 

No fire effect light, 

Check the LED light with technician. 

 
 
 

-13- 

 

Meaning of crossed 

out wheeled dustbin: 

Do not dispose of electrical appliances as unsorted municipal waste, use separate 
collection facilities. 
Contact you local government for information regarding the collection systems 
available. 
If electrical appliances are disposed of in landfills or dumps, hazardous substances can 
leak into the groundwater and get into the food chain, damaging your health and 

Содержание EF-14A








Отзывы: