ETL EF-14A Скачать руководство пользователя страница 5

 

 

TEMP. 

1.

 

TEMPERATURE button: Control temperature settings to choose temperature 

as desired. Setting range from 62F to 82F. Press once. Indicator light turn on. 
Temperature is set to 62F. 21Settings: 
(62F,63F,64F,65F,66F,67F,68F,69F,70F,71F,72F,73F,74F,75F,76F,77F,78F,79F,8
0F, 81F,82F) 

 

COLOR 

COLOR button: Makes the color flame effect changing. 
1.

 

Press once. Flame color effect gets changing. 

2.

 

Press again until desired setting is reached. 

 

TIMER 

TIMER button: Control timer settings to turn off fireplace at selected time. 
8 Settings range    1H,2H,3H,4H,5H,6H,7H,8House. 

 
 
 
DO NOT mix old and new batteries. 
DO NOT use rechargeable silver oxide cell batteries with remote control unit. 
DO NOT mix alkaline. Standard (Carbon-zine). Or rechargeable (Nickle - Cadmium) 
batteries. 
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or 
explode. 
 
 
 
 

-10- 

Important Safety Instructions 
 

When using this electrical appliance, basic precautions should be followed to reduce the 
risk of fire, electric shock, and injury to person, including the following 

 

 

This heater must be used on an AC supply only and the voltage marked on the heater 
must correspond to the supply voltage.                          

 

Do not switch the appliance on until it properly installed and described in this manual.

 

 

Do not leave the appliance unattended during use. 

 

Do not leave the appliance unattended whilst connected to the mains supply. 

 

Keep out of reach of children and do not allow them to operate this appliance. 

 

From time to time, check the cord for damage .Never use the appliance if the cord or 
any part of the appliance shows signs of damage. 

 

Do not operate this appliance with a damaged plug or cord, after a malfunction or after 
being dropped or damaged in any way. 

 

Repairs to electrical appliances should only be performed by a qualified electrician.   
Improper repairs may place the user at serious risk. 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

-11- 

 

Do not run the cable under carpets, rugs etc. 

 

Do not allow the mains cable to hang over sharp edges or come into contact with hot 
surfaces. 

 

WARNING: In order to avoid overheating, do not cover or obstruct the heater in any 
way. 

 

Overheating will result if it is accidentally covered. 

 

Never immerse the product in water or any other liquids. 

LED Bulb Replacement 

Содержание EF-14A








Отзывы: