be first switch on.
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE
Instructions for Use
The appliance can be operated either by the switches located on the top right hand side
of the fire or by supplied remote control.
TO ACCESS CONTROL PANEL
It takes some time for the receiver to respond to the transmitter. Do not PRESS the
buttons more than once within two seconds for correct operation.
Press once the button ON/OFF on the remote control this turns ON/OFF the appliance
and fire effect.
Press the DIMMER button for operates the dimmer mode. Each time the dimmer
button is Pressed, the intensity of the flame decrease. There are 5 brightness levels you
can cycle through and the OFF setting.
Press once the HEAT button for the low heat setting(750W); press twice for the high
heat setting(1500W); press again to turn off the heater.
Temperature setting. The highest temperature of the thermostat is 82F. There are
several thermostat levels you can cycle through between 62F and 82F, and the OFF
settings.
Timer setting. Press the TIMER button to cycle through the timer settings (1Hour,
2H,3H,4H,5H,6H,7H,and 8H) and the OFF setting.
Colorful Setting. Press the remotes’
, it can change the flame color.
Press the first time, it will change from RED color to Blue color. Press the second
Time, it will change from Blue to RED & BLUE color. Press the third time, it will
Come back to red color.
Infrared Remote control
Warning: Remote control requires
two AAA batteries
Remote control Operation
BUTTON FUNCTION
POWER
ON: Enables control panel functions and remote control.Turn on flame effect.
OFF: Disables control panel functions and remote control.Turn off flame effect.
FLAME
FLAME button: Makes flame effect dimmer and brighter.
NOTE: Flame effect stays on until power button is turned off. Flame effect must
be on for heater to turn on.
HEATER
HEATER button:Turn heater on and off.
NOTE: To prevent overheating, the heater fan will blow out cool air for 30
seconds after the heater turn off.
1.
Press once. Indicator lights up. 750W heater turns on and blows warm air.
2.
Press again. Indicator lights up. 1500W heaters turns on and blows hot air.
3.
Press again. Heaters turn off.
The fan blows cool air for 30 seconds to allow heater to cool down, then turns
off.