The delay will be effective only if the sensors have
been assigned to the Delay Zone. To assign a
sensor to the Delay Zone, open its cover and move
the jumpers on the circuit board according to the
opposite drawing. For more information, refer to
the manual of your alarm system.
Night Lamp mode
When used as a standalone alarm system, the ES-S6A can also be used as an LED
night lamp.
Press the “
Home Mode
” button on the remote control twice: the siren switches to
Home Mode and the strobe light turns into a night lamp. Press the “
Home Mode
”
button twice, then the “
Arm
” button once: the siren is in monitoring mode with night
lamp on. Press the “
Disarm
” button: the siren is disarmed and the LED lights switch
off.
