Entry / Exit Delay
A delay before activation can be set for the siren if the sensor is assigned to the Delay
Zone*.
If the Entry / Exit Delay is activated, the siren beeps once every second until the
system is armed, during the period of delay set. If one of your system’s sensors
triggers the alarm, the ringing out of the siren will be delayed accordingly.
* The name of the Delay Zone and the connection process may vary depending on
models. Refer to the user manual of your alarm system for more information.
Set up the delay:
Enter Setup Mode by pressing the power button once. Press the power button
again
-
once to set the delay to 10 seconds
-
twice to set the delay to 20 seconds
-
three times to set the delay to 30 seconds
-
four times to deactivate the delay
Default setting: no delay.
