Use as a standalone alarm system
Before using the ES-S6A as a standalone alarm system, it must be connected to
a remote control or an accessory (e.g. motion detector, door / window contact).
When the system is armed, if a sensor is triggered, the siren will ring out and the
LED lights will turn on.
Connect a remote control
Press the Connect button on the siren. The siren beeps once and the LEDs light up:
the siren is now in Connection Mode.
Press any button on the remote control.
You hear one beep: the remote control has been connected to the siren successfully
(if you hear 3 beeps, the remote control has already been connected).
Connect a wireless sensor
Press the Connect button on the siren. The siren beeps once and the LEDs light up:
the siren is now in Connection Mode.
Trigger the sensor (e.g. walk in front of the sensor if you want to connect a motion
detector)
You hear one beep: the accessory has been connected to the siren successfully (if
you hear 3 beeps, the accessory has already been connected).
The siren supports up to 10 remote controls and 10 wireless detectors.
