4. Close the lid by pressing down on both sides. If you hear a “click” on each side,
then you have successfully locked the lid in place.
5. To begin the vacuum process, touch the ‘CANISTER’ button. The unit will continue
to vacuum and then seal once air has been removed.
6. Once the indicator light has turned off, it is safe to remove the accessory hose
from the appliance and canister.
CARE & CLEANING
1.
Always unplug the unit before cleaning.
2. Do not immerse in water.
3. Do not use abrasives to clean the unit.
4. Wipe the outer surface with a soft, damp cloth and soap.
5. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
6. Dry all parts thoroughly before you plug in and operate the unit again.
7. Vacuum chamber may trap liquids that were drawn from the bag. Use a mild dish
washing soap and a warm, damp cloth to wipe away any liquids left behind
from the vacuum chamber. Dry thoroughly.
TROUBLESHOOTING
Nothing happens when I press the ’’VACUUM & SEAL’’ button:
Make sure the power cord is correctly plugged into the electrical outlet.
•
Make sure the power cord is not damaged in any way.
•
Make sure the electrical outlet is operative by plugging in another appliance. If it’s
not, please check the circuit breakers or fuses in your home.
•
Make sure the bag is positioned correctly down in the vacuum chamber.
•
Press down on both sides of the lid and make sure it is locked in place.
•
Wait for 25 minutes to allow appliance to cool off, and then try using again.
