ETI 54676341, Инструкция по использованию и уходу, Страница: 6 / 32

6
Installation (continued)
5
Making the electrical connections
□
Connect the black wire labeled L1 from the wrap light housing (A) to the black wire from the electrical box for
the switched power circuit.
□
Connect the wire labeled L2 from the Battery Back-up emergency LED driver to the black wire from the
electrical box box for the constant power circuit..
□
Connect the neutral white wire from the Battery Back-Up emergency LED driver to the same color wires in
the electrical box.
□
Connect the green wire from the wrap
light housing (A) to the ground wire in the
electrical box.
□
If a 0-10v dimming circuit is available,
remove the tape from the purple and gray
wires from the wrap light housing (A) and
connect them to the same color wires in the
electrical box.
□
If 0-10v dimming is not desired, wrap the
ends of the purple and gray wires with
electrical tape to cover the wire.
□ Cover the wire connections using the wire
connectors (CC).
□ Wrap the wire connectors (CC) with
electrical tape for a more secure connection.
6
Attaching the mounting bracket to
the electrical box
□ Tuck all electrical connections into the electrical box.
□
Mount the mounting bracket (AA) to the electrical box
using the two electrical box screws (DD).
AA
DD
CC
AA
A
CC