ETI 54676341 Скачать руководство пользователя страница 2

 2

Safety Information

WARNING:

 Carefully read and understand the information 

given in this manual before beginning the assembly and 
installation. Failure to do so could lead to electric shock, fire, or 
other injuries which could be hazardous or even fatal.

WARNING:

 Ensure the electricity to the wires you are 

working on is shut off. Either remove the fuse or turn off the 
circuit breaker.

WARNING:

 Risk of fire or electric shock. Installation requires 

a person familiar with the construction and operation of the 
light fixture’s/luminaire’s electrical system and the hazard 
involved. If not qualified, do not attempt installation. Contact a 
qualified electrician.

NOTICE:

 This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and the receiver.

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

WARNING:

 Changes or modifications not expressly approved 

by the party responsible for compliance could void the user’s 
authority to operate the equipment.

Warranty

This product is warranted for a period of 5 years from the date of original purchase against defects in materials and 
workmanship. If this product should fail to operate due to defects in material or workmanship within 60 months of 
purchase, see www.ETiSSL.com for details. This product will be repaired or replaced, at ETi’s option. This warranty 
is expressly limited to repair or replacement of product, and liability for direct, incidental, or consequential damages 
is hereby expressly excluded. Some states do not allow exclusions of direct, incidental or consequential damages, 
so the above limitation of exclusion may not apply to you. This warranty gives the consumer specific legal rights, 
which vary from state to state. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS 
PRODUCT IS MANUFACTURED.

Table of Contents

Table of Contents ......................................2
Safety Information ....................................2
Warranty ...................................................2
Pre-Installation .........................................3

Planning Installation ..............................3
Tools Required .......................................3

Package Contents ..................................3
Hardware Included .................................4

Installation ................................................4
Care and Cleaning ....................................9
Troubleshooting ........................................9

Содержание 54676341

































Отзывы: