ETHINK KL8-3, Инструкция по программированию

Страница: 5 / 8

KL8-3
5
It will add 1 hour when pressing
“ ”
each time
，
and the hours could be added the continually
when pressing the
“ ”
without stop
。
The adjustment range is 0~23
。
When you set up well of the start
time , you could go on to the next step
。
1
）
Close of Preheat setting
2
）
Setting Start Time of Preheat
3
）
Setting Continual time of Preheat
4
）
Setting Temprature of Preheat
5
）
the setting will
be finished
3
）、
Press
“ ”
to continual working time setting of Preheat
，
it will show the minimum continue time
is 5 minutes on the LCD
，
and this time will not flash
。
It will add 5 minutes by pressing
“ ”
each
time
，
And add 1 hour by pressing
“ ”
each time
。
please note that the maximum of continual time is
19 hours and 55 minutes
。
When you set up well of the continual time , you could go on to the next step
。
4
）、
Press
“ ”
to set setting temprature of Preheat
。
It will add 1
℃
when pressing
“ ”
and
the temperature could be added continually till 45
℃
when pressing the
“ ”
without stop
。
At this
time
，
when pressing
“ ”
angin
，
and the temperature could return 15
℃ 。
The range of adjustment
is
15~45
℃
5
）、
When everything is setting well
，
Press
“ ”，
the system will quit the Preheat setting status with
save
。
*** Notice ***
1
、
all setting of pre-heating must be in Power OFF status, just connect the spa with