ETEKCITY MSR-A2000, Руководство пользователя

Страница: 33 / 40

33
Technical Specifications (cont.)
[1] When measuring current, for 8A to 10A,
the measuring duration should not be over
2 minutes within a 10-minute time period,
and in this 10-minute time period, no other
current should flow through except within the
measuring duration.
[2] When measuring capacitance, for the
60.00mF range, the measuring duration should
be over 30 seconds.
[3] When measuring frequency, the typical
waveform is Square or Sine. The signal meets
the following conditions.
[4]
When measuring duty cycle, the typical
waveform is Square.
Frequency Amplitude (rms)
1Hz – 5mHz ≥ 700mV
Note: When measuring resistance and
capacitance, the influence of the resistance
reactance of the pen itself on the measured
value should be considered.
Characteristics Information
Display 5999
Frequency Response (Hz) (40 - 1000) Hz
Sample Rate for Digital Data 3 times/second
Auto Ranging √
True RMS √
Diodes Test √
Sleep Mode √
Continuity Test √
NCV Function √