21
1.
Rotate the rotary switch to
.
2.
Connect the black test lead to the
terminal
and the red test lead to the
terminal.
3.
Probe the test points and read the display.
Press
to enable and cycle through the
manual ranges.
1.
Rotate the rotary switch to
. Press
once to enter continuity testing mode, and
will be displayed.
2.
Connect the black test lead to the
terminal
and the red test lead to the
terminal.
3.
Probe the test points to measure the resistance
in the circuit and read the display. If the reading is
below 50ꭥ, the multimeter will beep continuously,
and the green indicator light will stay on.
Caution:
To avoid possible damage to your
multimeter or to the equipment undergoing
testing, disconnect the circuit power and
discharge all high-voltage capacitors before
measuring resistance.
Caution:
To avoid possible damage to your
multimeter or to the equipment undergoing
testing, disconnect the circuit power and
discharge all high-voltage capacitors before
testing for continuity.
Measuring Resistance
Testing for Continuity
Taking Measurements (cont.)
Содержание MSR-A2000
Страница 39: ...Notes ...
Страница 40: ...40 A2_21H24_US Connect with us Etekcity ...
