18
Pull the tilt stand outward to
its maximum reach (about
85° to the meter body).
[Figure 1.1]
The multimeter automatically enters sleep mode if
the rotary switch is not moved or a key is not pressed
for 30 minutes.
Pressing
or turn the rotary switch will turn
the multimeter back to operation mode from the
sleep mode.
One minute before Auto Power-Off, the buzzer will
beep five times to warn the user that the multimeter is
about to shut off. Before shutoff, the buzzer will emit
a long beep, and then the multimeter will shut off.
Adjust the Tilt Stand
Sleep Mode
Power On
Operation (cont.)
1.
To power ON the multimeter, turn the rotary switch
to any other position except
.
2.
To power OFF the multimeter, turn the rotary
switch to the
position.
Note:
In sleep mode, the multimeter will still use
a little power. If the multimeter is not going to be
used for a long period of time, the rotary switch
should be turned to the
position.
Figure 1.1
Содержание MSR-A2000
Страница 39: ...Notes ...
Страница 40: ...40 A2_21H24_US Connect with us Etekcity ...
