Fig. 6
Fig. 7
Before attaching the motor brackets
(E) (FIG 4) screw an inverted nut
(6mm) (D) on each stud then position
the brackets (E) on the studs and
secure them in-place using a second
6mm-nut and then lock the brackets to
the rail by tightening the inverted lock
nuts (D). Connect the opener edge (G)
to the doorframe or to the ceiling iron
angle (F) (Fig.5), maintaining a
minimum gap of 30mm from the top
panel’s maximum height (Fig. 6).
Check measurements for drilling insert
and lock the brackets F and fix the
opener to the ceiling with the correct
fixings (Fig. 7). Cut off any hanging
brackets
excess.
Warning:
Make sure the opener is
affixed to noggins
in ceiling and not to
plasterboard. Failure to have a safe
and secure fixing will lead to opener
falling, and cause serious persons and
/or property damage.
Содержание ET-1000E
Страница 8: ...Installation sectional steel track ...
Страница 9: ......
Страница 10: ......
Страница 16: ...Fig 3 PCB structure ...