Etdoor ET-1000E, Инструкция по установке и руководство пользователя

Страница: 13 / 19

Basic function setting and applying
1. Travel limit setting Opening & closing force self-learning
2. Matching the receiver and transmitter
Fig. A
Fig. B
3. Safety reverse force adjustment
Press
‘SET’ button and hold on until the LED displays
figure
‘1’, then adjust the up limit by pressing ‘up’
button. Fine-t
uning ‘up’ or ‘down’ button to determine
the final up limit position then press ‘set’ button the
display turn into ‘2’ automatically. Adjust the down limit
by pressing ‘down’ button. Fine-tuning ‘up’ or ‘down’
button to determine the final down limit position then
press ‘set’ button. The opener will operate a cycle
automatically to remember the limit positions and the
opening & closing force.
Press ‘CODE’ button and hold on until the LED dot is on.
(Fig. A) Then press any button (except the lock button)
on the transmitter once, the dot will be off; press the
button again the dot will fast flash then LED displays
‘11’
(Fig. B). After that the transmitter will be available.
Press ‘CODE’ button more than 8 seconds until the LED
displa
ys ‘C’, all the stored codes will be deleted.
Press ‘SET’ button and hold on until the LED displays
‘3’. It’s under force adjustment mode. Press ‘UP’ button
to increase the force and ‘DOWN’ button to decrease
the force. The maximum force is 9 and the minimum is
1. Press ‘SET’ button to confirm.