ETC Source Four HID PARNel, Руководство пользователя

Страница: 3 / 8

Source Four HID PARnel • 3
Color frame retaining clip usage
The color frame holder is equipped with a spring-loaded retaining clip that prevents
color frames and accessories from falling out. Make sure the Source Four HID PAR-
Nel has the color frame retaining clip in the locked position when hanging.(
Figure 2
)
N o t e :
Make sure to use colorframes or accessories with a 6.7 inch
inside diameter.
1.
Release the retaining clip by pushing it sideways. The retaining clip opens.
2.
Insert the color frame.
3.
Press the retaining clip down until it locks.
Focus Knob Positioning
To adjust the Focus knob tension, loosen or tighten the Focus knob screw.
C A U T I O N :
The focus knob does not rotate 360º. Do not attempt
to exceed rotational limit. Overtightening may result in
damage or breakage of the knob.
Lens identification
The Source Four PARNel comes equipped with two types of lenses; Wave/Stippled
(WS) and Wave/Clear (WC). The type can be identified by the lens texture.
The WC rear lens is in a “fixed” position inside the fixture. The WS lens is in the
rotating ring at the front of the fixture. The wave surfaces face each other.
Figure 2
Retaining clip in
the locked position
45º field angle
Focus knob in
flood position
Focus knob screw
Focus knob in
spot position
Focus knob screw
25º field angle
WC
WS
Wave / Stippled lens
Wave / Clear lens