ETC QuickTouch+ 12, Руководство пользователя

Страница: 30 / 32

26 Qui Control Station User Manual
• The Standby message will disappear as soon as Active control is obtained.
Step 3: Once Active control is obtained, you may now control motors from the station.
Using Trims and Soft Limits in a Merge System
A motor’s soft limit can be either set or cleared on any control station. This data will then be
communicated to all other control stations.
Setting a trim position for a motor on one control station WILL NOT update the trim positions
on other stations. This allows for each control station to store independent trim data for each
motor. For additional information on trim settings, See “Trims” on page 16.
N o t e :
You are not required to hold down the arrow button to obtain control at a Standby
station. A single press will initiate a control request.