ETC QuickTouch+ 12, Руководство пользователя

Страница: 26 / 32

22 Qui Control Station User Manual
Remote Verify that the area is safe. Release the remote control E-Stop button.
Remote Down Stuck
Cycle power with no remote buttons pressed. If error recurs, disconnect remote and contact
your system installer or ETC Technical Services.
Remote Up Stuck
Cycle power with no remote buttons pressed. If error recurs, disconnect remote and contact
your system installer or ETC Technical Services.
Self Test Failed
Another control station has an issue after the self test. Check other control station for
specifics regarding test.
Self Test not done
Wait for test to complete. If it does not complete, cycle power and wait for test to complete. If
it still does not complete, contact your system installer or ETC Technical Services.
Slack Cable Check to see that batten is not resting on something and that all lift lines are taut.
Slack Limit
Release Move button and verify proper cable travel. Ensure no slack cables remain. Try
move button again.
Soft Lower Limit The commissioning lower limit has been reached. Move the motor in the up direction.
Soft Upper Limit The commissioning upper limit has been reached. Move the motor in the down direction.
Station Error Another control station has an error. Check that station for specifics.
System NOT OK See accompanying messages for information on system.
System Self Test
Wait for test to complete. If it does not complete, cycle power and wait for test to complete. If
it still does not complete, contact your system installer or ETC Technical Services.
Up Limit Override Return batten to normal operating range. Release override button.
Untested A control station has not yet run its self test. Wait for station to complete the self test.
Waiting for Station Wait for other station to power up fully.
Waiting for Control
Another control station is currently controlling the system. Wait for other station to release
control or see other station for specific reason.
Message Corrective Action