MANUAL SGM700
21
2.7
Calibration
Press
key 3 for >2sec. to get in to
Configuration Menu
.
(In SGM710 or controller)
Go to the Calibration parameters by pressing key 1 <2 sec. until you see
- - - CAL
Check and delete calibration points.
To enter the Calibration settings, press key 2 <2 sec.
The following screen is visible:
Press key 1 <2 sec. to go to
CAL 3
and press key 2 <2 sec.
Use
CAL 3
to
check and delete all existing calibration points
. Step through the calibration points
with key 1. Delete a calibration point by pressing
key 3 >3 sec.
Up
Down
Delete
During deletions, the following screen is visible: