ETC Setup and Connect Guide
Paradigm Touchscreen Interface
Paradigm Touchscreen Interface Setup and Connect Guide
Page 2 of 14
ETC
Compatibility
Some features and functions are not supported with Acoustic Pulse Recognition (APR) touchscreens.
Specifically, touch-and-hold operations are unsupported by this technology which prevents access to
context menus (similar to a mouse right-click). Care should be taken when designing configurations to
include button access to timed event and setup features.
Operating Environment
• 0-50°C, 10-95% non-condensing humidity environment.
Help from ETC Technical Services
If you experience difficulty during setup or installation of the P-TSI, additional information is available from
etcconnect.com
, or by contacting ETC Technical Services at your local office listed on the bottom of this
page.
Setup and Connect
1:
Connect an Ethernet cable (not provided) between the Touchscreen Interface Net3 Network
receptacle and the network switch that is also connected to the Paradigm Central
Control Server (P-CCS).
2:
Setup the external touchscreen monitor (by others) following the manufacturers provided
instructions.
3:
Connect the external touchscreen monitor digital video interface (DVI) connector to the Touchscreen
Interface DVI-D receptacle.
4:
Connect the external touchscreen monitor USB cable (providing touchscreen functionality) to a
Touchscreen Interface USB port.
5:
Locate the power supply and IEC power supply cable.
6:
Insert the power supply round plug into the Touchscreen Interface 12V DC receptacle, located on the
rear panel, top left corner. Tighten the threaded lock ring to the receptacle for a secure installation.
7:
Using the IEC power cable required for your region, insert the receptacle end into the power supply
and the plug end into the power source.
